[Effects of Biochar on Growth and Pollutant Accumulation of Lettuce in Soil Co-contaminated with Tetracycline and Copper].

Through lettuce potting experiments, the effects of different types of biochar (apple branch, corn straw, and modified sorghum straw biochar with phosphoric acid modification) on lettuce growth under tetracycline (TC) and copper (Cu) co-pollution were investigated. The results showed that compared with those under CK, the addition of biochar treatment significantly increased the plant height, root length, shoot fresh weight, and root fresh weight of lettuce (P < 0.05). The addition of different biochars significantly increased the nitrate nitrogen, chlorophyll, and soluble protein content in lettuce physiological indicators to varying degrees, while also significantly decreasing the levels of malondialdehyde, proline content, and catalase activity. The effects of biochar on lettuce physiological indicators were consistent during both the seedling and mature stages. Compared with those in CK, the addition of biochar resulted in varying degrees of reduction in the TC and Cu contents of both the aboveground and underground parts of lettuce. The aboveground TC and Cu levels decreased by 2.49%-92.32% and 12.79%-36.47%, respectively. The underground TC and Cu levels decreased by 12.53%-55.64% and 22.41%-42.29%, respectively. Correlation analysis showed that nitrate nitrogen, chlorophyll, and soluble protein content of lettuce were negatively correlated with TC content, whereas malondialdehyde, proline content, and catalase activity were positively correlated with TC content. The resistance genes of lettuce were positively correlated with TC content (P < 0.05). In general, modified biochar was found to be more effective in improving lettuce growth quality and reducing pollutant accumulation compared to unmodified biochar, with modified sorghum straw biochar showing the best remediation effect.

Magnetic MoS2/Fe3O4 composite as an effective activator of persulfate for the degradation of tetracycline: performance, activation mechanisms and degradation pathways.

The activated persulfate (PS) process could produce sulfate radical (SO4·-) and rapidly degrade organic pollutants. The application of Fe3O4 as a promising PS activator was limited due to the rapid conversion of Fe2+ to Fe3+ on its surface. Mo4+ on MoS2 surface could be used as a reducing site to convert Fe3+ to Fe2+, but the separation and recovery of MoS2 was complex. In this study, MoS2/Fe3O4 was prepared to accelerate the Fe3+/Fe2+ cycle on Fe3O4 surface and achieved efficient separation of MoS2. The results showed that MoS2/Fe3O4 was more effective for PS activation compared to Fe3O4 or MoS2, with a removal efficiency of 91.8% for 20 mg·L-1 tetracycline (TC) solution under the optimal conditions. Fe2+ and Mo4+ on MoS2/Fe3O4 surface acted as active sites for PS activation with the generation of SO4•-, •OH, •O2-, and 1O2. Mo4+ acted as an electron donor to promote the Fe3+/Fe2+ cycling and thus improved the PS activation capability of MoS2/Fe3O4. The degradation pathways of TC were inferred as hydroxylation, ketylation of dimethylamino group and C-N bond breaking. This study provided a promising activated persulfate-based advanced oxidation process for the efficient degradation of TC by employing MoS2/Fe3O4 as an effective activator.

Comparison of qPCR and metagenomic sequencing methods for quantifying antibiotic resistance genes in wastewater.

Surveillance methods of circulating antibiotic resistance genes (ARGs) are of utmost importance in order to tackle what has been described as one of the greatest threats to humanity in the 21st century. In order to be effective, these methods have to be accurate, quickly deployable, and scalable. In this study, we compare metagenomic shotgun sequencing (TruSeq DNA sequencing) of wastewater samples with a state-of-the-art PCR-based method (Resistomap HT-qPCR) on four wastewater samples that were taken from hospital, industrial, urban and rural areas. ARGs that confer resistance to 11 antibiotic classes have been identified in these wastewater samples using both methods, with the most abundant observed classes of ARGs conferring resistance to aminoglycoside, multidrug-resistance (MDR), macrolide-lincosamide-streptogramin B (MLSB), tetracycline and beta-lactams. In comparing the methods, we observed a strong correlation of relative abundance of ARGs obtained by the two tested methods for the majority of antibiotic classes. Finally, we investigated the source of discrepancies in the results obtained by the two methods. This analysis revealed that false negatives were more likely to occur in qPCR due to mutated primer target sites, whereas ARGs with incomplete or low coverage were not detected by the sequencing method due to the parameters set in the bioinformatics pipeline. Indeed, despite the good correlation between the methods, each has its advantages and disadvantages which are also discussed here. By using both methods together, a more robust ARG surveillance program can be established. Overall, the work described here can aid wastewater treatment plants that plan on implementing an ARG surveillance program.

Yb-TCPP metal-organic framework as fluorescence sensor for detecting tetracycline in milk.

Developing effective means for detecting contamination in milk during production, processing, and storage is both important and challenging. Tetracycline (TC), due to its use in treating animal infections, is among the most prevalent organic pollutants in milk, posing potential and significant threats to human health. However, efficient and in situ monitoring of TC remains lacking. Nevertheless, we have successfully developed a highly sensitive and selective fluorescence method for detecting TC in milk using a metal-organic framework material made from Yb-TCPP (ytterbium-tetra(4-carboxyphenyl)porphyrin). The calculated Stern-Volmer constant (KSV) was 12,310.88 M-1, and the detection limit was 2.44 × 10-6 M, surpassing previous reports. Crucially, Yb-TCPP fluoresces in the near-infrared region, promising its development into a specific fluorescence detection product for practical TC detection in milk, offering potential application value.

Tetracyclines contamination in European aquatic environments: A comprehensive review of occurrence, fate, and removal techniques.

Tetracyclines are among the most commonly used antibiotics for the treatment of bacterial infections and the improvement of agricultural growth and feed efficiency. All compounds in the group of tetracyclines (tetracycline, chlorotetracycline, doxycycline, and oxytetracycline) are excreted in an unchanged form in urine at a rate of more than 70%. They enter the aquatic environment in altered and unaltered forms which affect aquatic micro- and macroorganisms. This study reviews the occurrence, fate, and removal techniques of tetracycline contamination in Europe. The average level of tetracycline contamination in water ranged from 0 to 20 ng/L. However, data regarding environmental contamination by tetracyclines are still insufficient. Despite the constant presence and impact of tetracyclines in the environment, there are no legal restrictions regarding the discharge of tetracyclines into the aquatic environment. To address these challenges, various removal techniques, including advanced oxidation, adsorption, and UV treatment, are being critically evaluated and compared. The summarized data contributes to a better understanding of the current state of Europe's waters and provides insight into potential strategies for future environmental management and policy development. Further research on the pollution and effects of tetracyclines in aquatic environments is therefore required.

Antimicrobials in Eisenia fetida earthworms: A comprehensive study from method development to the assessment of uptake and degradation.

In this work, an accurate analytical method was developed for the simultaneous analysis of twenty-seven antimicrobials (AMs) in earthworms using liquid chromatography coupled to a triple quadrupole mass spectrometry detector (UHPLC-MS/MS). Adequate apparent recoveries (80-120 %) and limits of quantification (LOQ) (1 µg·kg-1 - 10 µg·kg-1) were obtained, with the exception of norfloxacin (34 µg·kg-1). The method was applied to evaluate the accumulation of sulfamethazine (SMZ) and tetracycline (TC) in earthworms after performing OECD-207 toxicity test, in which Eisenia fetida (E. fetida) organisms were exposed to soils spiked with 10 mg·kg-1, 100 mg·kg-1 or 1000 mg·kg-1 of SMZ and TC, individually. The results confirmed the bioaccumulation of both AMs in the organisms, showing a greater tendency to accumulate SMZ since higher bioconcentration factor values were obtained for this compound at the exposure concentrations tested. In addition, the degradation of both AMs in both matrices, soils and earthworms was studied using liquid chromatography coupled to a q-Orbitrap high resolution mass spectrometry detector. Thirteen transformation products (TPs) were successfully identified, eight of them being identified for the first time in soil/earthworm (such as 4-Amino-3-chloro-n-(4,6-dimethylpyrimidin-2-yl)benzenesulfonamide or 4-(dimethylamino)-1,11,12a-trihydroxy-6,6-dimethyl-3,7,10,12-tetraoxo-3,4,4a,5,5a,6,7,10,12,12a-decahydrotetracene-2-carboxamide, among others) and their formation/degradation trend over time was also studied. Regarding the biological effects, only SMZ caused changes in earthworm growth, evidenced by weight loss in earthworms exposed to concentrations of 100 mg·kg-1 and 1000 mg·kg-1. Riboflavin decreased at all concentrations of SMZ, as well as at the highest concentration of TC. This indicates that these antibiotics can potentially alter the immune system of E. fetida. This research represents a significant advance in improving our knowledge about the contamination of soil by AM over time. It investigates the various ways in which earthworms are exposed to AMs, either by skin contact or ingestion. Furthermore, it explores how these substances accumulate in earthworms, the processes by which earthworms break them down or metabolise them, as well as the resulting TPs. Finally, it examines the potential effects of these substances on the environment.

Metal-organic-framework-confined quantum dots enhance photocurrent signals: A molecularly imprinted photoelectrochemical cathodic sensor for rapid and sensitive tetracycline detection.

BACKGROUND: Tetracycline (TC), a cost-effective broad-spectrum antibacterial drug, has been excessively utilized in the livestock and poultry industry, leading to a serious overabundance of TC in livestock wastewater. However, conventional analytical methods such as liquid chromatography and gas chromatography face challenges in achieving sensitive detection of trace amounts of TC in complex substrates. Therefore, it is imperative to develop a highly sensitive and anti-interference analytical method for the detection of tetracycline in livestock wastewater. RESULTS: A porphyrin-based MOF (PCN-224)-confined carbon dots (CDs) material (CDs@PCN-224) was synthesized by a "bottle-around-ship" strategy. The reduced carrier migration distance is conducive to the separation of electron-hole pairs and enhanced the photocurrent signal due to the tight coupling of CDs and PCN-224. Further, molecularly imprinted polymer (MIP) was synthesized by rapid in-situ UV-polymerization and employed as a recognition element. The specific recognition of the target by imprinted cavities blocks electron transfer, resulting in a "turn off" response signal, thus realizing the selective detection of TC. Under optimal conditions, the constructed MIP-PEC cathodic sensor detected 1.00 × 10-12 M to 1.00 × 10-7 M of TC sensitively, with a limit of detection of 3.72 × 10-13 M. In addition, the proposed MIP-PEC sensor demonstrated good TC detection performance in actual livestock wastewater. SIGNIFICANCE: The strategy based on MOF pore-confined quantum dots can effectively enhance the photocurrent response of the photosensitive substrate. Simultaneously, the MIP constructed by in-situ rapid UV-polymerization showed excellent anti-interference and reusable properties. This work provides a promising MIP-PEC cathodic sensing method for the rapid and sensitive detection of antibiotics in complex-matrix environmental samples.

Green hairy basil seed mucilage biosorbent for dispersive solid phase extraction enrichment of tetracyclines in bovine milk samples followed by HPLC analysis.

Unmodified hairy basil seed mucilage (Ocimum basilicum L.), with attractive features as structural functionality and adsorption capacity, was employed as a green biosorbent for dispersive solid phase extraction and enrichment of oxytetracycline, tetracycline, and doxycycline before quantitation by HPLC-UV for the first time. Hairy basil crushed seed increased the contacting surface area and was completely dispersed in the sample solution to extract tetracyclines under acidic condition with the assistance of ultrasonic waves. The analytes in the extraction phase were separated on a C18 column under isocratic condition with a mobile phase consisted of acetonitrile and trifluoroacetic acid. Influence of chemical and physical variables on the extraction efficiency of the developed method was investigated and optimized systematically. Under the optimal condition of all experimental parameters, good linear ranges were obtained at 15.0-500 µg L-1 for tetracyclines with determination coefficients more than 0.9994. Limits of detection (LODs) and limits of quantitation (LOQs) ranged 5.0-7.0 and 15.0 µg L-1, respectively. Relative standard deviations (RSDs) of the proposed method at 100 and 300 µg L-1 for TCs were less than 13 % and 10 %, respectively with percentage TC recoveries from spiked standard ranging 83.1-109.9 %. This simple, reliable, cost-effective, and environmentally friendly method was successfully applied for the analysis of tetracycline residues in milk. The greenness of the proposed method was assessed using the Analytical Eco-Scale and AGREE protocol.

Evaluation of antibiotic residues in honey: a systematic review and meta-analysis.

Nowadays, incorrect apply of antibiotics to treat infections in honey has led to health risks for humans and antibiotic resistance. Current systematic review and meta-analysis conducted to study antibiotic residues in honey. Data were obtained through searching the databases, including Scopus, Web of Science, PubMed, and other internal databases. The pooled concentration of antibiotic residues was 5.032 (µg/kg) that ranged from 4.72 to 5.33 (µg/kg). The ranking of antibiotics concentration was found in order of fluoroquinolone (8.59 µg/kg) > tetracycline (5.68 µg/kg) > sulfonamides (5.54 µg/kg) > macrolides (4.19µg/kg), respectively. Liquid chromatography-mass spectrometry (LC-MS) method (37.9.7%), high-performance liquid chromatography (HPLC) method (34.4%), and enzyme-linked immunosorbent assay (ELISA) method (27.5.8%) were the most used methods in various studies. In order to avoid contamination, proper use of antibiotics, placement of hives at a suitable distance from agricultural environment, and regular control of antibiotic residues in honey seems to be necessary.

Dual-functional molecularly imprinted doped carbon dot based on metal-organic frameworks for tetracycline adsorption and determination.

A carbon dot (CD) was prepared by using tryptophan as a single carbon source and demonstrated its good selective fluorescence quenching effect on tetracycline (TC). The modified metal-organic frameworks (MOF) NH2-MIL-101 was chosen as matrix, doped with CD, molecularly imprinted polymer (MIP) prepared with TC as the template, and finally CD-MOF-MIP complexes (CD@MIP) was synthesized. For comparison, MIP were also prepared without CD as well as non-imprinted polymers and their ability was tested, respectively. CD@MIP is a nanomaterial with bright fluorescence under the irradiation of ordinary UV equipment (λ = 360 nm), which has a fast and stable fluorescence quenching for TC and a good linear relationship for TC in the concentration range 0-400 µmol L-1. The quantum yield of CD@MIP was 12.75% and the 3σ limit of detection (LOD) for CD@MIP was 0.59 µmol L-1. The maximum adsorption capacity of CD@MIP reached 304.6 mg g-1 and the adsorption equilibrium was reached after about 75 min. The adsorption of CD@MIP to tetracycline spiked in milk samples reached 90.0 mg g-1 within 2 h, which was much higher than that of NIP (48.4 mg g-1) under the same conditions, as demonstrated by high performance liquid chromatography (HPLC). The results obtained showed that CD@MIP combined the high adsorption capacity of MOF, the specific adsorption of molecular imprinting and the fluorescence properties of CD, can determine and rapidly removeTC in the environment.

Signal Modulation of Organic Photoelectrochemical Transistor by a Z-Scheme Photocathodic Gate: An Innovative Dual Amplification Strategy for Sensitive Aptasensing Application.

Pursuing a more efficient signal amplification strategy is highly demanded for improving the performance of the promising cathodic photoelectrochemical (PEC) sensors. In this work, we present an extremely effective dual signal amplification strategy by the integration of a Z-scheme nanohybrids-based photocathode with the effective signal modulation of an organic photoelectrochemical transistor (OPECT) device. Specifically, photocathodic gate material of CdTe-BiOBr nanohybrids with a Z-scheme electron-transfer route was designed and synthesized for preliminary improvement of the activity of the photogate; afterward, signal modulation of the OPECT system by the photocathodic gate of CdTe-BiOBr was then accomplished for further signal amplification by 2 orders of magnitude. As a result, the output PEC signal of CdTe-BiOBr was enhanced by 17.5-fold as compared to BiOBr, and the channel current (IDS) of the OPECT device was 117-fold magnified than its gate current (IG) response. Exemplified by tetracycline (TC) as a model target and aptamer as the specific recognition element, a versatile cathodic aptasensing platform was constructed based on the proposed OPECT device. The introduced OPECT aptasensor merits advantages, including a good linear range (1.0 × 10-12 to 1.0 × 10-6 M), a low limit of detection (4.2 × 10-13 M), and superior sensitivity than the traditional PEC methods for TC detection, which represents a universal protocol for developing the innovative photocathodic OPECT sensing platform toward accurate analysis.

Influence of copper and aging on freely dissolved tetracycline concentration in soil.

Copper (Cu) and tetracyclines (TCs) often coexist in agricultural soils because of the use of manures on farmland; however, the influence of Cu on the bioavailability of TCs is still unclear, especially for cases with aging Cu. The freely dissolved concentrations (FDCs) of TCs are believed to be directly related to their bioavailability. In the present study, the FDCs of TCs were determined using organic-diffusive gradients in thin films (o-DGT), and the influence of Cu on the FDCs of TCs in soils was evaluated. The results showed that the FDCs of tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC) were 0.11-0.93, 0.28-1.02, and 0.24-0.53 µg/kg in the CK groups (no Cu added) and accounted for 0.09-0.58, 0.10-1.40, and 0.05-1.19‰ of their total concentrations which ranged from 0.2 to 10.0 mg/kg for TC, OTC, and CTC, respectively. The co-contamination of Cu reduced the FDCs of TCs in most cases, and aging increased the influence of Cu. The presence of Cu resulted in a decrease in the TC FDC by 35.48-95.04% in aged soils and 3.42-87.19% in newly prepared soils. FTIR analysis revealed that aging facilitated the bonding of Cu to soil particles via Cu-O, and Cu bonded to groups such as hydroxyl groups (-OH) in TCs. Our results suggested that the presence of Cu might reduce the bioavailability of TCs, and aging would enhance these effects. This is helpful for the bioavailability analysis of TCs under co-contamination of heavy metals.

A novel Corchorus olitorius-derived biochar/Bi12O17Cl2 photocatalyst for decontamination of antibiotic wastewater containing tetracycline under natural visible light.

Herein, a novel composite of Corchorus olitorius-derived biochar and Bi12O17Cl2 was fabricated and utilized for the degradation of tetracycline (TC) in a solar photo-oxidation reactor. The morphology, chemical composition, and interaction between the composite components were studied using various analyses. The biochar showed a TC removal of 52.7% and COD mineralization of 59.6% using 150 mg/L of the biochar at a pH of 4.7 ± 0.5, initial TC concentration of 163 mg/L, and initial COD of 1244 mg/L. The degradation efficiency of TC increased to 63% and the mineralization ratio to 64.7% using 150 mg/L of bare Bi12O17Cl2 at a pH of 4.7 ± 0.5, initial TC concentration of 178 mg/L, and COD of 1034 mg/L. In the case of biochar/Bi12O17Cl2 composite, the degradation efficiency of TC and COD mineralization ratio improved to 85.8% and 77.7% due to the potential of biochar to accept electrons which retarded the recombination of electrons and holes. The synthesized composite exhibited high stability over four succeeding cycles. According to the generated intermediates, TC could be degraded to caprylic acid and pentanedioic acid via the frequent attack by the reactive species. The prepared composite is a promising photocatalyst and can be applied in large-scale systems due to its high degradation and mineralization performance in a short time besides its low cost and stability.

Activation of persulfate by heterogeneous nano zero-valent iron/halloysite nanotubes: reaction behavior, mechanism, and implication for tetracycline hydrochloride degradation.

A novel composite (nZVI/HNTs) was prepared via incorporating nano zero-valent iron (nZVI) on halloysite nanotubes (HNTs) for degrading tetracycline hydrochloride (TCH) with existence of persulfate (PS). The adsorption process of nZVI/HNTs to TCH conformed to the Freundlich isotherm model and pseudo-second-order kinetic model, and its maximum adsorption capacity was 76.62 mg·g-1. Furthermore, the nZVI/HNTs + PS system exhibited satisfactory degradation efficiency (84.21%) for TCH, and stable nZVI/HNTs (Fe leaching < 0.001 mg·L-1) could be reused. When nZVI/HNTs dosage, PS dosage and temperature increased, TCH degradation could be enhanced. After four cycling, nZVI/HNTs + PS system had still 65.8% degradation for TCH. The quenching tests and EPR analysis evidenced that SO4•- was predominant instead of •OH in such system. Three possible pathways of TCH degradation were provided through the liquid chromatograph-mass spectrometer (LC-MS) determination. Meanwhile, the biological toxicity prediction analysis indicated that the nZVI/HNTs + PS system would be an environment friendly treatment method toward TCH pollution.

Nitrogen-doped graphene for tetracycline removal via enhancing adsorption and non-radical persulfate activation.

Nitrogen-doped graphene (NG) was synthesized via direct thermal annealing treatment. The obtained NG showed outstanding removal ability for tetracycline (TC) ascribed to enhanced adsorption and persulfate activation. The maximum TC adsorption capacity calculated from the Langmuir model of NG was 227.3 mg/g, which was 1.66 times larger than nitrogen-free graphene. The coexistence of NG and persulfate (PS) exhibited complete degradation of TC within 120 min attributed to the successful modification of nitrogen. Further analysis demonstrated that non-radical electron transfer was the dominant degradation pathway, which was different from the widely acknowledgeable radical mechanism. An electron donor-mediator-acceptor system was introduced, in which TC, NG, and PS performed as electron donor, mediator, and acceptor, respectively. The potential intermediates in the TC degradation process were detected and toxicity assessment was also performed. In addition, more than 75.8% of total organic carbon was removed, and excellent reusability was manifested in multiple adsorption and degradation experiments.

Two birds with one stone: Ratiometric sensing platform overcoming cross-interference for multiple-scenario detection and accurate discrimination of tetracycline analogs.

Environmental pollution caused by tetracycline antibiotics (TCs) is a major concern for public health worldwide. Trace detection and reliable discrimination of tetracycline and its analogs are consequently essential to determine the distribution characteristics of various tetracycline family members. Here, a dual-response sensor was constructed by integrating the fluorescence emission of fluorescein isothiocyanate (FITC) doped SiO2 and Eu3+. A portable Lab-on-Paper device is further fabricated through probe immobilization, which allows convenient visual detection of tetracycline using a smartphone. In addition, for the coexistence of multiple tetracycline analogs, dimensionality reduction via principal component analysis is applied to the spectra, realizing accurate differentiation of the four most widely used tetracycline analogs (tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DOX)). The dual-response nanoplatform enabled a wide-gamut color variation crossing from green to red, with limit of detection (LOD) of 2.9 nM and 89.8 nM for spectrometer- and paper-based sensors, respectively. Analytical performance was examined in multiple real samples, including food, environmental, and biological settings, confirming robust environmental adaptability and resistance. Compared to previous TC sensors, this method has several notable improvements, including improved ecological safety, accessibility, reproducibility, practicality, and anti-cross-interference capacity. These results highlight the potential of the proposed "two birds with one stone" strategy, providing an integrated methodology for synchronous quantitative detection and derivative identification toward environmental contaminants.

Synthesis of molecularly imprinted polymers based on nitrogen-doped carbon dots for specific detection of chlortetracycline by reversed phase microemulsion method.

Among the tetracycline antibiotics, chlortetracycline (CTC) is the most frequently used antibiotic except for tetracycline (TC) for enhancing the ability of the organism to fight bacterial infections. The poor metabolism and degradability of CTC can cause serious health effects. Most studies have focused on the detection and analysis of TC, and research on CTC is relatively scarce. This is because the structures of CTC and TC and oxytetracycline (OTC) are extremely similar, and even indistinguishable. In this study, CTC was used as a template molecule and a molecularly imprinted layer was coated on the surface of highly fluorescent N-CDs using a reversed-phase microemulsion method to form N-CDs@MIPs. It was possible to specifically identify CTC without the influence of TC and OTC, which are extremely similar in structure. By comparing with the non-imprinted polymer (N-CDs@NIPs), it exhibited high sensitivity and selectivity with an imprinting factor of 2.02. And it was used in the determination of CTC in milk with recoveries and relative standard deviations of 96.7%-109.8% and 0.64%-3.27%, respectively, with high accuracy and precision. The specificity of the measurement is excellent compared with other assays, and it is a valid and reliable assay.

Amino-functionalized Al-MOF modulated TpTt-COF with dual-emission for fluorescent and optosmart detecting tetracycline in food samples.

Tetracycline residues in animal-derived food pose serious harm to human health, making it demanded to develop simple and sensitive method for detecting tetracycline. Herein, a dual-emission synchronous response fluorescence probe is reported based on amino-functionalized Al-MOF modulated TpTt-COF (donate as NMT). NMT exhibits excellent dual-emission at 455 and 575 nm under single excitation. Tetracycline is sensitively detected through quenching the dual-emission of NMT. NMT specifically recognizes tetracycline through intermolecular hydrogen bonding between -OH/-NH2 of tetracycline and deprotonated O-/-NH-/CN of NMT. A calibration curve is built between the fluorescence ratio and the tetracycline concentration with a detection limit of 0.014 µmol/L. NMT is employed to detect tetracycline in milk, pork and chicken, and displays satisfactory recoveries of 94.39-105.67%, respectively. The optosmart sensor based on NMT and smartphone has been constructed for visually detecting tetracycline. This method provides routes to construct MOF-COF fluorescence probes and has good prospects in food analysis.

Towards direct detection of tetracycline residues in milk with a gold nanostructured electrode.

Tetracycline antibiotics are used extensively in veterinary medicine, but the majority of the administrated dose is eliminated unmodified from the animal through various excretion routes including urine, faeces and milk. In dairy animals, limits on residues secreted in milk are strictly controlled by legislation. Tetracyclines (TCs) have metal chelation properties and form strong complexes with iron ions under acidic conditions. In this study, we exploit this property as a strategy for low cost, rapid electrochemical detection of TC residues. TC-Fe(III) complexes in a ratio of 2:1 were created in acidic conditions (pH 2.0) and electrochemically measured on plasma-treated gold electrodes modified with electrodeposited gold nanostructures. DPV measurements showed a reduction peak for the TC-Fe(III) complex that was observed at 50 mV (vs. Ag/AgCl QRE). The limit of detection in buffer media was calculated to be 345 nM and was responsive to increasing TC concentrations up to 2 mM, added to 1 mM FeCl3. Whole milk samples were processed to remove proteins and then spiked with tetracycline and Fe(III) to explore the specificity and sensitivity in a complex matrix with minimal sample preparation, under these conditions the LoD was 931 nM. These results demonstrate a route towards an easy-to-use sensor system for identification of TC in milk samples taking advantage of the metal chelating properties of this antibiotic class.

Colloidal Gold Immunochromatography and ELISA Traceability of Tetracycline Residues from Raw Milk to its Dairy Products.

BACKGROUND/AIM: The presence of tetracycline (TC) and its residues in raw milk and milk dairy products poses a threat to human health due to the induction of antibiotic resistance of bacteria that can be transmitted between animals, humans, and the environment. The aim of this study was to investigate the transfer of TC from raw milk to different dairy products: pasteurized milk, boiled milk, sour milk, skimmed milk, and cottage cheese. We analyzed samples of milk from different sources: household farmers, local farms, and milk factories. MATERIALS AND METHODS: The analyses of TC in milk and dairy products were performed using colloidal gold immunochromatography assay (GICA) and enzyme-linked immunosorbent assay (ELISA). RESULTS: The highest content of TC was found in the milk purchased from local household farmers; therefore, these samples were chosen for the study of TC transfer to dairy products. TC was also found in sour milk at levels comparable with those obtained in raw milk. The average TC content decreased following heat treatment of the milk, as follows: for pasteurized milk 22.07% and for boiled milk 29.35%. The highest concentrations were determined in cottage cheese in the range 200-620 µg/kg. CONCLUSION: TC residues are transferred from milk to dairy products in various amounts depending on the preparation conditions, and due to their chemical properties, they accumulate in concentrated derivatives, such as cheese. Therefore, TC can be identified even in cheeses prepared from milk with undetected antibiotic levels.